10 Tips for a DIY Music Studio

So onto planning that acoustic space. The quietest spot at home is not necessarily the furthest from the main door. Don’t make the mistake of just looking at the sound sources within your home. Often, sounds from outside your home are louder and harder to control than those inside. That deserted corner of your apartment or garage might just be the most vulnerable to overflying planes or the honk of the garbage truck along the road. Instead, what you want to isolate are the loudest sounds that could reach your mike. One simple way to do that is to use an air buffer and build on a room-in-a-room concept.

Now, assuming you have control of the internal environment (i.e. you can arrange to have your kids out with family when you’re recording) here’s how to deal with the external. The walls of your home in contact with the outside will resonate with the sounds from the outside. So look at your internal walls and find a nice junction or section that isn’t in contact with the outside. Think about building a physical structure around that (with a door of course). It can be large, or in the example below, as small as a 1m x 1m vocal booth. What that creates is an air buffer or dead space between the ‘external’ walls of your home and the ‘internal’ walls of your recording room. 

This was an amazing shot to discover. Couldn’t quite figure how to capture the DIY vocal booth but finally got this from a bottom up angle. The vocal space was designed into the intial room restructuring with a double wall filled with rockwool. Unfortunately that left one slight problem on the sound isolation front: the fully solid single-layer glass door with gaps all around. The solution was to sheetblok the entire room and door surface in such a way as to create an ‘airlock’ when closing the door fully. Mounted on this layer were the sound absorbers that very successfully eliminate all reflected sounds.

Facing the light would be the RodeNTK, an awesome condenser microphone. Behind that is the wall-mounted Samsung monitor that allows me to trigger recording and playback directly from this booth. How that works is simply through a wireless keyboard that’s sitting on a ledge below the screen.

2 Comments so far

  1. iphonemusic on August 13th, 2008

    Nice blog, i have added it to my favourites, greetings

  2. One on October 5th, 2008

    How would possibly build a room in another due to the reconstructive materials needed? In this case of yours, do you have to actualy built another room as in make the walls from wood, then have it placed with soundproof mats, then comes the rockwool, then your sonex? If it is possible to do so, could you explain it in detail how not to make any sources of sound be it from the inside or out to leak into the unfiltered areas that are known to be untraceable? I would like to built the same vocal booth, but to much sorted out calculations it is not possible to do so in an event which communication is needed from the person doing the recording and the person in the vocal booth.

Leave a Reply